Macrocyclic nano-fillers enabled size-selective molecular sieving for organic solvent forward osmosis

Go to the profile of Bofan Li
Mar 15, 2020
4
0

Membrane-based separations have been successfully demonstrated in water and gas separations. Separating organic solvents using membranes was conceptually discussed in the early 1970s, but it is relatively new compared to water and gas separations. Organic solvents have been extensively employed in many industrial processes, and they are usually incinerated after one-time use. Using membranes to achieve the separation targets and recycle the organic solvents can lower the energy consumption and reduce the footprints. Currently, most of the researches on membrane-based organic solvent separations focus on pressure-driven processes but few are on osmotic-driven processes.

In 2017, Lively and Sholl proposed the idea of organic solvent forward osmosis (OSFO)1. At the same time, our group was conducting experiments to demonstrate the feasibility of OSFO by using common solvents, ethanol, isopropanol and hexane2. However, the relatively low solvent flux and high reverse solute flux were not desirable for an effective separation process. Thus, we attempted to modify the membrane in order to overcome the permeability and selectivity trade-off and to achieve better separation performance.

Previously, we fabricated a thin-film composite (TFC) membrane with a polyamide network as the selective layer. This polyamide network was formed via interfacial polymerization between m-phenylenediamine (MPD) in an aqueous phase and trimesoylchloride (TMC) in an oil phase, which was very dense and could also be used for seawater desalination. We hypothesized that the polyamide network can be loosened to increase the flux by incorporating nano-fillers to generate a thin-film nanocomposite (TFN) membrane. However, most of the nano-fillers used previously, such as metal oxide nanoparticles, carbon nanotubes and metal-organic frameworks (MOFs), tended to have weak affinity with the polyamide network, which would lead to particle aggregation and result in a lower selectivity. Hence, we aimed to find a nano-filler possessing good affinity with the polyamide network to simultaneously loosen the polyamide network without introducing defects and exhibit size selectivity towards the draw solutes in order to increase both permeability and selectivity.

Inspired by two works in our group3,4, we turned our interest to macrocyclic molecules, where they have intrinsic cavities that may function as molecular sieves. We then started to search for some macrocyclic molecules that could have excellent chemical interactions with the polyamide network. Cyclodextrin is a commonly used type of macrocyclic molecules, but it only possesses hydroxyl groups that are difficult to be reacted or interacted without any modification. Crown ether and cucurbituril are less common and they do not have suitable functional groups either. Calixarene, in contrast, can be modified to contain sulfonic groups, which might have ionic interactions with the polyamide network. Envisioning the suitable cavity size for molecular sieving, we decided to try sulfocalix[4]arene (SCA) first. The SCA functionalized TFN membrane displayed a significant decrease in the reverse solute flux, but its ethanol flux still remained low. From field emission scan electron microscopy (FESEM) images, the thickness of the polyamide layer decreased dramatically after incorporation with SCA. Moreover, the intensities of free volume and void of the polyamide network were confirmed to be larger with SCA inside using positron annihilation spectroscopy (PAS).

Schematic diagram
Schematic illustration of the interfacial polymerization process with STCAss and SCA as nano-fillers.

Why was the ethanol flux still low even though the selective layer became thinner and looser? We postulated that the cavity size of the SCA was smaller than the kinetic diameter of ethanol so that it would block the passage of ethanol. In order to validate our postulation, we found another type of calixarene, i.e., sulfothiacalix[4]arene sodium salt (STCAss), whose phenolic block is linked by sulfur atoms instead of methylene bridge. The optimized structure drawn using Material Studio® suggested that the cavity size of STCAss was slightly larger than the kinetic diameter of ethanol. Eventually, the results of the OSFO performance showed that the ethanol flux increased and the reverse solute flux decreased by incorporating STCAss as we expected. We further demonstrated the enhanced size-selective molecular sieving properties by measuring the diffusivities of water, methanol and ethanol as well as testing rejections towards probing molecules.

 

If you are interested in our work, you may find the full paper here: Li, B., Japip, S. & Chung, T. S. Nat. Commun. 11, 1198, doi:10.1038/s41467-020-15070-w (2020).


1          Lively, R. P. & Sholl, D. S. From water to organics in membrane separations. Nat. Mater. 16, 276-279, doi:10.1038/nmat4860 (2017).

2          Cui, Y. & Chung, T. S. Pharmaceutical concentration using organic solvent forward osmosis for solvent recovery. Nat. Commun. 9, 1426, doi:10.1038/s41467-018-03612-2 (2018).

3          Liu, J., Hua, D., Zhang, Y., Japip, S. & Chung, T. S. Precise molecular sieving architectures with janus pathways for both polar and nonpolar molecules. Adv. Mater. 30, 1705933, doi:10.1002/adma.201705933 (2018).

4          Wu, J., Liu, J. & Chung, T. S. Structural Tuning of Polymers of Intrinsic Microporosity via the Copolymerization with Macrocyclic 4-tert-butylcalix[4]arene for Enhanced Gas Separation Performance. Adv. Sustainable Syst. 2, 1800044, doi:10.1002/adsu.201800044 (2018).

Go to the profile of Bofan Li

Bofan Li

Research Engineer, National University of Singapore

No comments yet.