In-situ reconstructed Ru atom array on MnO2 for acidic oxygen evolution reaction

Like Comment
Read the Paper

High overpotential and metal leaching-induced deactivation are two major challenges for oxygen evolution reaction (OER) electrocatalysts operating in corrosive acid. OER involves multiple reaction intermediates (e.g., *O, *OOH, *OH, shown in Figure 1). Their adsorption energies follow the scaling relationship (ΔGOOH = ΔGOH + 3.2±0.2 eV), which cannot be independently modulated, resulting in a much larger voltage than what thermodynamics authorizes. Previously, our group has been focused on optimizing the oxygen-binding strength, ranging from electronic manipulation to crystal phase engineering. However, the AEM-guided electrocatalysts from single-atom-based (Pt doped NiO1, Ag doped MnO22) to nanoparticle-based (Au/MnO23) heterogeneous electrocatalysts, can hardly surpass the AEM-proposed minimum overpotential. To confront this technical dilemma, a new design principle and reaction mechanism should be considered.

One possible route for bypassing the extra reaction intermediate *OOH is to utilize the direct O-O radical coupling, namely oxide path mechanism4 (OPM) for heterogeneous catalysis and oxo-oxo coupling mechanism5 (I2M) for homogeneous catalysis, which has never been realized to date for designing and fabricating acid-stable OER electrocatalyst due to its stringent requirements for the geometric configuration of active metal sites. To be sharply different for the OPM pathway, the schematic illustration of simplified mechanisms has been listed in Figure 1.

Figure 1. Schematic representation of simplified adsorbate evolution mechanism and oxide path mechanism.

Therefore, we report a crystalline α-MnO2 nanofiber-supported Ru electrocatalyst (Ru/MnO2) that fits the OPM design rule. The catalyst preparation is based on a one-step cation exchange method with Ru atoms substituting surface Mn atoms. The positions of Ru atoms follow the periodic arrangement of Mn sites in the crystalline α-MnO2, resulting in the formation of small regularly arranged Ru ensembles (e.g., atom array). The cation exchange reaction also happens in-situ during OER, which not only triggers reconstruction of small Ru ensembles into big patches of Ru atom arrays but also avoids metal leaching-induced catalyst deactivation by capturing leached Ru ions back to support. The Ru atom array consists of symmetric Ru sites that are highly favorable for the OPM-type OER. The optimized Ru/MnO2 delivers an overpotential of a mere 161 mV at a current density of 10 mA cm-2 along with outstanding long-term durability (>200 h). The intrinsic OER activity of Ru/MnO2 (Turnover frequency TOF = 1192.30 h-1 at an overpotential of 165 mV) is more than 600 folds higher than that of RuO2 (1.96 h-1). The overall performance of Ru/MnO2 is better than that of the state-of-the-art OER electrocatalysts. Extensive in-situ and ex-situ characterizations together with theoretical calculations verify the OER proceeded on the Ru/MnO2 via OPM, in which the key step involves direct O-O radial coupling. Such a unique reaction pathway allows the Ru/MnO2 to go beyond the overpotential ceiling set by the conventional mechanism.

The present work not only provides new insights for designing electrochemically stable active catalysts but also establishes a deterministic step to resolve bottlenecks in electrolytic hydrogen production.

Finally, this joint research was made satisfactory by various support and efforts with many researchers. Especially Professor Xiaopeng Li, who is currently Shanghai Distinguished Professor at Donghua University. He did his Ph.D. study at Max Planck Institute of Microstructure Physics and Martin Luther University of Halle Wittenberg. He has published more than 60 papers in academic journals such as Nat. Catal., Joule, Matter, and Chem. Sci. His main research topic is metal-air battery, electrolyzer, environmental catalyst.

For more information, please read our paper in Nature Catalysis. “In-situ Reconstructed Ru Atom Array on α-MnO2 with Enhanced Performance for Acidic Water Oxidation”



  1. Lin, C. et al., Accelerated active phase transformation of NiO powered by Pt single atoms for enhanced oxygen evolution reaction. Chem. Sci. 9, 6803-6812 (2018).
  2. Ni S. et al., Single atomic Ag enhances the bifunctional activity and cycling stability of MnO2. Chemical Engineering Journal 366, 631-638 (2019).
  3. Zhang, H. et al., Enhanced Interactions between Gold and MnO2 Nanowires for Water Oxidation: A Comparison of Different Chemical and Physical Preparation Methods. ACS Sustain. Chem. Eng. 3, 2049-2057 (2015).
  4. Suen, N.-T. et al., Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives. Chem.Soc. Rev. 46, 337-365 (2017).
  5. Shaffer, D. W. et al., O–O bond formation in ruthenium-catalyzed water oxidation: single-site nucleophilic attack vs. O–O radical coupling. Chem. Soc. Rev. 46, 6170-6193 (2017).

Chao Lin

assistant professor, Hanyang university


Go to the profile of Yingpeng Wu
28 days ago

Great work!